Stick welding is widely popular because it is considered the most economical welding method and can also be used on dirty or rusty metals. It is quite effective for welding alloys or joints. It is applicable for both indoor and outdoor use.
The following are Key Features of the best stick welder:
1. The amount of power required:
Choosing the best stick welder is largely dependent on its intended use. Use also determines the voltage required. Choose one that offers a wide amperage range. The standard power provided (residential and commercial) is 115 volt AC. Other power options are:
a) High-power, 30-amp circuit- 220-240 volts AC. Residential wiring of this will require a licensed electrician
b) Single-Phase and Three-phase. Single phase operation draws from the 220-240 voltage line. Three-phase is used is used in industrial locations.
Choose a Stick welder that offers you both DC and AC welding options. It will enable you to use many different metals.
2. Excellent design that makes it easy to operate – The buttons must be available in an easy to understand and operate design. This helps the user to reduce error while operating it.
3. Additional features such as a Built in stabilizer and ‘two stick modes (which provide the right arc features) for various types of electrodes and one with noise and dust reduction features are a plus.
1. You will need a good quality arc welding machine. You can be buy one from ahp welders.
2. Very important accessories to have an area auto darkening welding helmet and other protective apparel like gloves.
3. You should be aware of polarity compatibility. An A/C only welding machine should only be used with stick welding designed to weld on A/C.
No comments:
Post a Comment